● Direct Facility Access Button: Multiline voice terminal users who have pressed
FACILITY to activate the busy-to-idle reminder must wait until all queued ARS
users have been serviced.
● Virtual Facilities (V2 only): Virtual Facilities may be used in place of trunk
groups in ARS routing patterns. When used with ARS, a digit translation scheme
may be associated with each virtual facility. See the “Virtual Facilities” feature
description for more information.
Administration Requirements
System:
● Specify your area code (HNPA )
ARS
● ARS Access Code (1-9999) - Default = 9
●
International ARS Routing Pattern Number (1-8) - No default
●
Three Emergency Numbers Lists (7-digit numbers) - No default
● NPA Routing Table (NPA code and associated pattern number 1-8) - Default = 1
● HNPA Exception List:
—
List Number (l-4)
—
Pattern Number (1-8)
—
Exception Numbers (NXX or NXX-YYYY). Last three digits may be “.”
● FNPA Exception Telephone List
—
Pattern Number (1-8)
—
Telephone Number (8-digits in the form NPA-NXX-YY). Last two digits may
be .
“ ”
● Digit Translations Table
—
Trunk Group Facility Access Codes (1-9999) or, in V2, Virtual Facility Codes
(#190-#199)
—
Associated NPA (NPA)
—
Number of digits to remove for calls within associated NPA (1-10 digits,
none)
—
Digit pattern to add for calls within associated NPA (maximum of 5 digits) -
Default = none
—
Number of digits to remove for calls not in associated NPA (1-10, none) -
Default = O
—
Digit pattern to add for calls not in associated NPA (maximum of 5 digits) -
Default = none
2-57
● ARS Routing Pattern:
Pattern Number (l-8)