Built-In Speakerphone (BIS) Voice Terminal With Display (7305H04C) PEC 3162-
DIS (V2 only)
The BIS Voice Terminal with Display (Figure 4-12) is available for general use and as a
Switched Looped Attendant Console (SLAC). In general use, it can be desk or wall mounted;
as a console it is normally desk mounted.
The terminal is about 9-1/2 inches wide, 5-1/4
inches high, and 9-1/4 inches long. The set comes equipped with the following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDs
● Test/Program Switch (two positions)
—
T—Used to test the operation of LEDs and ringer
—
P—Inoperative on this terminal
● Built-In Speakerphone
● Built-In Display Module
—
Screen for call information and time displays
—
Clock/Timer controls
—
Contrast control for screen display
● Speakerphone Volume Control
● Built-In HFAI Microphone
● Speaker/Ringer Volume Control
● Nine Predefined Buttons
—
Conference
—
Drop
—
Transfer
—
Hold
—
Speakerphone
—
Recall
— Message
—
Microphone
—
HFAI
● 34 Feature Buttons (only 12 have associated LEDs)
For General Use:
—
Two predefined as System Access
—
32 programmable (default assignments are Repertory Dial [2], Last Number
Dialed [1] Flex DSS [27], Send All Calls [1], and Account Code Entry [1])
4-30