Filter
Top Products
sender will flash and will then go dark when the call is answered. However, if the
call is placed directly to the attendant position or is forwarded to the position and
thereby arrives on a System Access button or a Loop button (e.g., if a DID PDC is
logged-in at the attendant position), then no LED indications on the Selector Console
will be provided.
If a DID call is directed to the answering position and is
subsequently extended to a station, then the LED on the Selector Console associated
with the station will flash if the call returns to the answering position. The LED
will light steadily if the call is answered by the station.
● Call Coverage: DID calls receive standard call coverage treatment.
● Conference: For conference purposes,
DID calls count as one of two allowable
outside parties.
● Dictation System Access: A DID number may be associated with the dictation
system access code. This allows an outside caller to access the dictation equipment.
● Direct Group Calling: A DID call will be directed to a DGC group if the DID
number matches the DGC group access code.
● Night Service: DID calls do not receive Night Service treatment. A DID call will
ring at the appropriate station whether Night Service is activated or not.
● Off-Premises Stations (OPS): DID calls can be directed to OPS.
● Paging System Access: A DID call may access a paging zone. This allows the
user to dial in and utilize the Paging feature.
Dial restricting the paging code will
block this interaction.
●
Personal Dial Codes: DID calls will be redirected to PDCs logged in at other
terminals in the system.
DID calls to an unassigned PDC or a FPDC that is not
logged-in will be either redirected to the attendant or receive Reorder Tone.
● Pooled Facility Access: Access to pooled facilities via DID is permitted. This
includes access to WATS, FX, tie trunks, private lines, dictation equipment, and
paging systems. This access is provided by selecting facility access codes so that they
will match DID numbers.
● Station Message Detail Recording (SMDR): For V2 systems, only one SMDR
record is produced if an outgoing call is originated by a DID trunk. The STN field
will contain 0000, the FAC field will contain the facility access code of the trunk
group used to complete the call, and the CALLED NUMBER field will contain the
called number.
Administration Requirements
System:
● Send misdirected DID calls to the Attendant Console (Yes, No) - Default = Yes.
● Set number of DID digits matched against dial codes (2-4, None) - Default = 3.
Trunk Port:
● DID trunk type (Immediate Dial, Wink Start)
●
Number of digits to be received from CO on this trunk - Default = 3.
2-128