Filter
Top Products
SPEED DIALING
Description
There are two
Dialing.
System Speed
types of Speed Dialing: (1) System Speed Dialing, and (2) Personal Speed
Dialing:
Allows the System Administrator to store up to 90 numbers (maximum of 28 characters in
length) that are accessible by dialing 3-digit codes from any voice or data terminal.
Examples of typical System Speed Dial ring numbers include frequently-dialed DDD
numbers (together with leading facility access codes for WATS, FX etc. ) and account codes.
V1 Systems: The following special characters may be used in System Speed Dialing
numbers.
CHAR. FUNCTION
*
Produces a 1.5 second pause. (Since System 25 does not have a Dial
Tone detector, judicious use of the pause character will help to ensure
that intermediate Dial Tones are obtained before more digits are
sent. )
V2 Systems: The following special characters may be used in System Speed Dialing
numbers.
CHAR.
FUNCTION
*
Produces a 1.5 second pause. (Since System 25 does not have a Dial
Tone detector, judicious use of the pause character will help to ensure
that intermediate Dial Tones are obtained before more digits are
sent. )
#*
Transmits an actual’’*”.
##
Transmits an actual “ #“ .
#lxx Represents a Virtual Facility code (where xx = 90-99). This may
appear
only at the beginning of the stored number.
#3
Marks the beginning of End-to-End Signaling. (System begins
transmitting touch-tone signals to the far end switch.)
A user cannot use a Speed Dialing number for which he/she is toll restricted, outward
restricted, or facility access restricted.
System Speed Dialing Operation: To place a call using a System Speed Dialing number,
the user goes off-hook and presses the # button on the dial pad followed by the 3 digit code
assigned to the desired number.
The system interprets the associated stored number as if it
2-212