Filter
Top Products
● Call Accountability: When a station user dials ##PDC to provide accountability for
a call and then dials the desired digits, the ##PDC is not saved by the Last Number
Dialed feature.
● Conference: When a station user adds a party to a conference, the number dialed is
saved as the Last Number Dialed.
●
Direct Station Selection (DSS): Numbers called using an DSS or Flex DSS
button are not saved by the Last Number Dialed feature. The number currently
stored by Last Number Dialed is not changed by operations of these buttons.
● Personal Lines: When a user originates a call from a Personal Line, only the digits
dialed after the line is accessed are saved by the Last Number Dialed feature. The
same type of line must be selected to get dial tone for placing another call using Last
Number Dialed. If a different type of line is used, the call may be directed to the
wrong destination.
●
Pooled Facility—Direct Access:
When a user originates a call from a Direct
Facility Access button, only the digits dialed after the line is accessed are saved by
the Last Number Dialed feature.
The same type of button should be selected to get
dial tone for placing another call using Last Number Dialed. If a different type of
button is used, the call may not be directed to the right destination.
● Repertory Dialing: When using a Repertory Dial button to place a call, the
numbers dialed are saved by Last Number Dialed.
When the call is redialed using
Last Number Dialed, the same type of button where dial tone was originally
accessed should be used again to ensure that the call is directed to the correct
destination.
●
Speed Dialing: When using a Personal or System Speed Dialing code to place a call,
the code is saved by Last Number Dialed.
When the call is redialed using Last
Number Dialed, the same type of button where dial tone was originally accessed
should be used again to ensure that the call is directed to the correct destination.
●
System Access/System Access Originate Only Buttons: If a user originates a
call from one of these buttons, the same type of button should be selected for getting
dial tone to place a second call with the Last Number Dialed feature. Using another
type of button, such as Personal Line or Direct Facility Access, to get dial tone may
.
prevent the call from completing properly.
● Transfer: When a station user Transfers a call, the dialed number (of the party to
whom the call is transferred) is saved as the Last Number Dialed.
Administration Requirements
Last Number Dialed is a default feature on all multiline voice terminals in a V2 system.
One button is assigned to the feature at each set.
The feature can be moved/removed by
administration.
Hardware Requirements
None
2-154