Filter
Top Products
34-Button Deluxe Voice Terminal (7305H02D) PEC 3162-417
The 34-Button Deluxe terminal (Figure 4-10) is available for general use and as a Direct
Trunk Attendant Console. The voice terminal is about 10-1/4 inches wide, 5-l/2 inches high,
and 8-1/2 inches long. It comes equipped with the following:
● Handset
● Touch Dial Pad (not DTMF)
● I-Use and Status LEDs
● Test/Program Switch (two positions)
—
T—Used to test the operation of LEDs and ringer
—
P—Used to program features on the voice terminal
● Built-in Speaker
●
Speaker/Ringer Volume Control
● Seven Predefined Buttons
—
Conference
—
Drop
—
Transfer
—
Hold
—
Speaker
—
Message
—
Recall
● 34 Feature Buttons (each equipped with I-Use and Status LEDs)
For General Use:
—
Two predefined as System Access
—
32 Programmable (default assignments for V1 are, Repertory Dial [3], Send
All Calls [1], Account Code Entry [1], and Flex DSS [27]; in V2, one
Repertory Dial button is replaced by Last Number Dialed)
For Use as a Direct Trunk Attendant Console:
—
Two predefined as System Access
—
Six other predefined (Start, Cancel, Release, Return-On-Don’t-Answer,
Return-On-Busy, and Alarm)
—
26 programmable (default assignments for V1 are Repertory Dial [3], Flex
DSS, Account Code Entry [1], Attendant Message Waiting [1], Night Service
[l], trunk appearances [15 as Personal Lines*], Group Call Coverage [1], and
Direct Facility Access† [3]; in V2, one Repertory Dial button is replaced by
Last Number Dialed)
* On the primary Attendant Console, the first 15 trunks in the system are assigned
button appearances on the console.
If there are fewer than 15 trunks, the remaining
buttons are not assigned.
On the secondary Console these trunks do not receive
4-26