Filter
Top Products
<Options>:
If the Command Mode menu item <Options> is chosen, the terminal displays the data port’s
administered options.
System default values for each option are also shown. The display
shown below is similar to what is actually presented on the screen. (See Tables 2-F and 2-G)
for additional information on options. )
OPTIONS
Speed (highest)
Parity
Mismatch
Local Echo
Answer Text
Connect Indication
Recall Sequence
CURRENT
9600
Even
Yes
Yes
Yes
Yes
Br-Br
DEFAULT
19200 (Auto)
Even
No
Yes
Yes
Yes
Br-Br
<eXit> <Change options>
<View options>
In V1 systems, only the System Administrator can change options. In V2 systems, the
System Administrator can still perform the task or can authorize data terminal users to
change their own options.
Selection of <Change options> from the sub-menu shown above
allows the data terminal user to change the values in the CURRENT column. Refer to the
“User Changeable Options”
subsection for complete information on this feature.
<Hangup>:
The <Hangup> option can be used to terminate a connection to the data port. For V2
systems only, this option is needed for AT&T STARLAN NETWORK endpoints to disconnect
from a STARLAN Interface CP through Command Mode. Accessing <Hangup> provides the
user with these options:
● <eXit>— Do not hang up. Return to the top level of Command Mode.
● <All>—Hang up (disconnected)
2-96