Filter
Top Products
Administration Requirements
Special Feature Ports:
● Requires a port assignment on a ZTN79 ATL Station Circuit Pack (CP) for each
Selector Console.
● Assign Group Select button hundreds groups.
System:
● Assign Attendant Call Park codes.
Hardware Requirements
Requires an Attendant Selector Console, and a port interface on a ZTN79 ATL Station CP.
The Selector Console requires a KS-22911, List 1 Power Supply, associated 115V ac power
outlet, and a 400 B-type Adapter.
The 400B2 Adapter provides power to the console at the
wall jack. The Console connects to a port on the ZTN79 ATL Station CP.
Detailed connection information is provided in Figure 2-7. Descriptions of the Station
Interconnect Panel(SIP), Trunk Access Equipment (TAE), and associated cables and
adapters, as shown on the figures, are provided under the heading “Connectivity” in Section
4.
SYSTEM 25
CABINET
ZTN79
PART OF
HYBRID
OCTOPUS CABLE
LINE CP
PART OF
SIP
— — ——
C2
SIP
W1
400B2
C1
ATTENDANT
.
B1
ADAPT
ADAPT
SELECTOR
B2
CONSOLE
T1
— — ——
C7
— — ——
— — ——
-48VDC
P1
LEGEND :
B1 -
B2 -
C1 -
C2 -
C7 -
P1 -
T1 -
W1 -
*-
RANGE :
Figure
TYPICAL-103A CONNECTING BLOCK*
40062 ADAPTER -
FURNISHED WITH CONSOLE
MODULAR CORD (D8W-87)
- FURNISHED WITH CONSOLE
OCTOPUS CABLE CABLE (WP90780) - PEC 2720-05P
CORD D6AP-87 -
FURNISHED WITH CONSOLE
KS22911 POWER SUPPLY, - FURNISHED WITH CONSOLE
23A1 DXS CONSOLE - PEC 62509
4 PAIR INSIDE WIRING CABLE*
FURNISHED BY INSTALLER
WITHIN 2000 FEET OF SYSTEM CABINET
(LOCAL POWER REQUIRED >1000 FEET)
2-7. Attendant Direct Extension Selector Console Connections
2-28