Filter
Top Products
Setting Personal Preferences
431
3. Select After a preset delay.
4. Enter the inactive period, and then select Minute(s) or Hour(s) from the pick list.
5. Tap OK.
NOTE You need to turn off and then turn on your handheld before this change is
enabled.
IMPORTANT If you lock your handheld, you must enter the exact password to
reactivate your handheld. If you forget the password, your handheld will present the
hint you have entered to help you remember the password. If you still cannot
remember the password, you must perform a hard reset to resume using your
handheld. Performing a hard reset deletes all the records in your handheld; however,
you can restore all synchronized data at the next HotSync operation. See “Performing
a hard reset” in Appendix A for more information.
Locking your handheld manually
You can turn off and lock your handheld manually.
To lock and turn off your handheld:
1. Tap Lock & Turn Off.
2. To use your handheld, turn it on and then enter the password.
Tap to select Minutes or Hours
Enter the amount of time
Select After a preset delay
Tap Lock and
Turn Off