Filter
Top Products
3-19
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Connecting the Footstand
Connecting the Footstand
If your phone is placed on a table or desk, connect the footstand to the back of the phone.
Figure 3-8 illustrates the footstand on the Cisco Unified IP Phone 8961, 9951, and 9971. To attach the
footstand to the phone, align the tabs to the appropriate set of holes on the phone and snap into place.
Figure 3-8 Cisco Unified IP Phone 8961, 9951, and 9971
1
Insert the curved connectors into the lower
slots.
2
Lift the footstand until the connectors snap into the upper slots.
Note Connecting and disconnecting the footstand requires a
little extra force than you might expect.
1
1
2
2
2
2
1
1
193118