Filter
Top Products
10-15
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 10 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Current Access Point Screen
The Current Access Point screen displays statistics about the current access point on the wireless Cisco
Unified IP Phone 9971. Table 10-7 describes the information that appears in this screen.
To display the Current Access Point screen, follow these steps:
Procedure
Step 1 Press the Applications button.
Step 2 Select Administrator Settings.
Step 3 Select Status.
Step 4 Select Current Access Point.
To exit the Current Access Point screen, press the Exit softkey.
Rcvr Resolution Resolution of the video stream received by the phone from the remote
end point. VGA(640x480), CIF (352x288), QCIF (176x144), etc.
Sender Start Time Timestamp indicating when the first RTP packet is sent to the network.
Rcvr Start Time Timestamp indicating when the first RTP packet is received from the
network.
Latency Estimate of the network latency, expressed in milliseconds. Represents
a running average of the round-trip delay, measured when RTCP
receiver report blocks are received.
Table 10-6 Video Statistics Items for the Cisco Unified Phone (continued)
Item Description
Table 10-7 Current Access Point on the Cisco Unified IP Phone 9971
Item Description
AP Name Name of the AP if it is CCX-compliant; otherwise the MAC address is
displayed here.
MAC Address MAC address of the AP.
Frequency The latest frequency where this AP was observed.
Last RSSI The latest RSSI in which this AP was observed.
Beacon Interval Number of time units between beacons. A time unit is 1.024 ms.
Capability This field contains a number of subfields that are used to indicate requested or
advertised optional capabilities.
Basic Rates Data rates required by the AP at which the station must be capable of operating.
Optional Rates Data rates supported by the AP that are optional for the station to operate at.
Current Channel The latest channel where this AP was observed.