Filter
Top Products
10-8
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 10 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Step 4 Select Status > Ethernet Statistics.
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear List softkey.
To exit the Ethernet Statistics screen, press the Exit softkey.
Table 10-3 Ethernet Statistics Message Information for the Cisco Unified IP Phone
Item Description
Rx Frames Number of packets received by the phone
Tx Frames Number of packets sent by the phone
Rx Broadcasts Number of broadcast packets received by the phone
Restart Cause—One of the
following values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Cause of the last reset of the phone
Elapsed Time Amount of time that has elapsed since the phone last rebooted.
Port 1 Link state and connection of the Network port (for example,
Auto
100 Mb Full-Duplex
means that the Network port is in a link-up state
and has auto-negotiated a full-duplex, 100-Mbps connection)