Filter
Top Products
7-5
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 7 Configuring Settings on the Cisco Unified IP Phone
Ethernet Setup Menu
Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN)
configured on a Cisco Catalyst switch in which the phone
is a member.
If the phone has not received an auxiliary VLAN, this
option indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative
VLAN are configured, this option is blank.
Display only—Cannot configure.
The phone obtains its Operational
VLAN ID via Cisco Discovery
Protocol (CDP) or Link Level
Discovery Protocol Media Endpoint
Discovery (LLDP-MED). This
information comes from the switch
to which the phone is attached. To
assign a VLAN ID manually, use the
Admin VLAN ID option.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary
VLAN from the switch; otherwise it is ignored.
1. Scroll to the Admin. VLAN ID
option, press the Select softkey,
and then enter a new Admin
VLAN setting.
2. Press the Apply softkey.
PC VLAN Allows the phone to interoperate with 3rd party switches
that do not support a voice VLAN. The Admin VLAN ID
option must be set before you can change this option.
1. Make sure the Admin VLAN ID
option is set.
2. Scroll to the PC VLAN option,
press the Select softkey, and
then enter a new PC VLAN
setting.
3. Press the Apply softkey.
Ta bl e 7-1 Et he rne t Se t up Menu Options (continued)
Option Description To Change