Filter
Top Products
8-32
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 8 Configuring Features, Templates, Services, and Users
Setting Up Services
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings >
Feature Control Policy.
The Find and List Feature Control Policy window displays.
Step 2 Click Add New to define a set of policies.
Step 3 Enter the following settings.
• Name—Enter a name for a new Feature Control Policy
• Description—(Optional) Enter a description.
• Feature Control Section—Check the check box for the features that you want to change the default
setting.
Table 8-5 displays the list of features that can be configured and the default value.
Step 4 Click Save.
Step 5 Apply the policy to the phone by including it in the following settings.
• Enterprise Parameters Configuration—Applies to all phones in the system.
• Common Phone Profile Configuration—Applies to all phones in a group.
• Phone Configuration—Applies to an individual phone
For more information, refer to the “Feature Control Policy” chapter in the Cisco
Unified Communications Manager Administration Guide.
Setting Up Services
You can give users access to Cisco Unified IP Phone Services on the Cisco Unified IP Phone 8961,
9951, and 9971. You can also assign a button to different phone services. These services comprise XML
applications and Cisco-signed Java midlets that enable the display of interactive content with text and
graphics on the phone. The Cisco Unified IP Phone manages each service as a separate application.
Examples of services include local movie times, stock quotes, and weather reports.
Before a user can access any service:
Table 8-5 Feature Control Policy Default Values
Feature Default Value
Forward All Enabled
Park Disabled
To Voicemail Disabled
Conference List Enabled
Speed Dial Enabled
Call Back Enabled
Redial Enabled
Barge Enabled