Filter
Top Products
F-14
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Appendix F Cisco Unified IP Phone Non-Lockable Wall Mount
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones with Key Expansion Module
Figure F-13 Bracket Installation
Step 2 Attach the phone bracket to the IP phone and key expansion assembly.
a. Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
cords from the base of the phone
b. Remove the label covers that are conceal the screw holes.
c. Attach the phone bracket by inserting the tabs into the mounting tabs on the back of the phone. The
phone ports should be accessible through the holes in the bracket.
Level wall
bracket on wall
Mark mountin
g
holes through
bracket on wa
ll
345742
B
A
C
D E
Insert anchors
into wall
Screw bracke
t
to wall using
Phillips head
screws