Filter
Top Products
9-8
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 9 Customizing the Cisco Unified IP Phone
Automatically Disabling the Cisco Unified IP Phone Display
Table 9-1 Display On and Off Configuration Fields
Field Description
Days Display Not Active Days that the display does not turn on automatically at the time specified in
the Display On Time field.
Choose the day or days from the drop-down list. To choose more than one
day, Ctrl-click each day that you want.
Display On Time Time each day that the display turns on automatically (except on the days
specified in the Days Display Not Active field).
Enter the time in this field in 24 hour format, where 0:00 is midnight.
For example, to automatically turn the display on at 7:00 a.m., (0700), enter
7:00. To turn the display on at 2:00 p.m. (1400), enter 14:00.
If this field is blank, the display will automatically turn on at 0:00.
The default value is 07:30.
Display On Duration Length of time that the display remains on after turning on at the time
specified in the Display On Time field.
Enter the value in this field in the format hours:minutes.
For example, to keep the display on for 4 hours and 30 minutes after it turns
on automatically, enter 4:30.
If this field is blank, the phone will turn off at the end of the day (0:00).
Note If Display On Time is 0:00 and the display on duration is blank (or
24:00), the display will remain on continuously.
The default value is 10:30.
Display Idle Timeout Length of time that the phone is idle before the display turns off. Applies
only when the display was off as scheduled and was turned on by an end-user
(by pressing the Select button on the phone).
Enter the value in this field in the format hours:minutes.
For example, to turn the display off when the phone is idle for 1 hour and 30
minutes after an end-user turns the display on, enter 1:30.
The default value is 1:00.