Filter
Top Products
8-31
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 8 Configuring Features, Templates, Services, and Users
Configuring Feature Control Policies
You can add, update, or delete service parameters as needed as described in the “Cisco Unified IP Phone
Services Configuration” chapter in the Cisco Unified Communications Manager Administration Guide.
Note If you change the service URL, remove an IP phone service parameter, or change the name
of a phone service parameter for a phone service to which users are subscribed, you must
click Update Subscriptions to update all currently subscribed users with the changes, or
users must resubscribe to the service to rebuild the correct URL.
To modify a phone button template for PAB or Fast Dial, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings >
Phone Button Template.
Step 2 Click Find.
Step 3 Select the phone model.
Step 4 Click Copy, enter a name for the new template, and then click Save.
The Phone Button Template Configuration window opens.
Step 5 Identify the button you would like to assign, and select Service URL from the Features drop-down list
box associated with the line.
Step 6 Click Save to create a new phone button template using the service URL.
Step 7 Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8 Select the new phone button template from the Phone Button Template drop-down list box.
Step 9 Click Save to store the change and then click Reset to implement the change.
The phone user can now access the User Options pages and associate the service with a button on the
phone.
For additional information on IP phone services, go to the “Cisco Unified IP Phone Services
Configuration” chapter in the Cisco Unified Communications Manager Administration Guide, For
additional information on configuring line buttons, go to the “Cisco Unified IP Phone Configuration”
chapter and “Configuring Speed-Dial Buttons” section in the Cisco Unified Communications Manager
Administration Guide.
Configuring Feature Control Policies
You can limit the appearance of some telephony features on the Cisco Unified IP Phone 8961, 9951, and
9971 by enabling or disabling these features in the feature control policy configuration. When you
disable a feature in the feature control policy configuration for a phone, you restrict the user’s access to
the feature and the softkeys associated with the feature does not display on the phone.
To create a Feature Control Policy, follow these steps: