Filter
Top Products
CHAPTER
7-1
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
7
Configuring Settings on the Cisco Unified
IP Phone
The Cisco Unified IP Phone includes many configurable network settings that you may need to modify
before the phone is functional for your users. You can access these settings, and change some of them,
through menus on the phone. Settings that are display-only on the phone are configured in Cisco Unified
Communications Manager Administration.
This chapter includes the following topics:
• Setup Menus on the Cisco Unified IP Phone, page 7-1
• Ethernet Setup Menu, page 7-4
• WLAN Setup Menu, page 7-7
• IPv4 Setup Menu Options, page 7-10
• Security Setup Menu, page 7-13
Setup Menus on the Cisco Unified IP Phone
The Cisco Unified IP Phone includes the following configuration menus:
• Network Setup—Provides options for viewing and configuring a variety of network settings. For
more information, see the
“Ethernet Setup Menu” section on page 7-4.
–
Ethernet Setup—A submenu of the Network Setup menu, the Ethernet Setup menu items
provide configuration options to configure the Cisco Unified IP Phone over an ethernet
network. For more information, see the
“Ethernet Setup Menu” section on page 7-4.
–
WLAN Setup—A submenu of the Network Setup menu, the WLAN Setup menu items provide
configuration options to configure the Cisco Unified IP Phone with the wireless local area
network (WLAN). For more information, see the
“WLAN Setup Menu” section on page 7-7.
–
IPv4 Setup—A submenu of the Ethernet Setup menu and of the WLAN Setup menu, the IPv4
menu items provide additional network options for viewing and setting. For more information,
see the
“IPv4 Setup Menu Options” section on page 7-10.
• Security Setup—Provides options for viewing and configuring a variety of security settings. For
more information, see the
“Security Setup Menu” section on page 7-13.
Before you can change option settings on the Network Setup menu, you must unlock options for editing.
See the “Unlocking and Locking Options” section on page 7-3 for instructions.