Filter
Top Products
7-2
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 7 Configuring Settings on the Cisco Unified IP Phone
Setup Menus on the Cisco Unified IP Phone
For information about the keys you can use to edit or change option settings, see the “Editing Values”
section on page 7-3.
You can control whether a phone user has access to phone settings by using the Settings Access field in
the Cisco Unified Communications Manager Administration Phone Configuration window (in the
Product Specific Information portion of the window).
Related Topics
• Displaying a Setup Menu, page 7-2
• Unlocking and Locking Options, page 7-3
• Editing Values, page 7-3
• Ethernet Setup Menu, page 7-4
• WLAN Setup Menu, page 7-7
• IPv4 Setup Menu Options, page 7-10
• Security Setup Menu, page 7-13
Displaying a Setup Menu
To display a configuration menu, perform the following steps.
Procedure
Step 1 Press the Applications button .
Step 2 Select Administrator Settings.
Step 3 Select Network Setup or Security Setup.
Note For information about the Status menu, see Chapter 10, “Viewing Model Information, Status,
and Statistics on the Cisco Unified IP Phone.” For information about the Reset Settings menu,
see Chapter 12, “Troubleshooting and Maintenance.”
Step 4 Enter your user ID and password, if required, then click Sign-In.
Step 5 Perform one of these actions to display the desired menu:
• Use the navigation arrows to select the desired menu and then press the Select button.
• Use the keypad on the phone to enter the number that corresponds to the menu.
Step 6 To display a submenu repeat Step 5.
Step 7 To exit a menu, press the Exit softkey or the back arrow softkey .
Related Topics
• Unlocking and Locking Options, page 7-3
• Editing Values, page 7-3
• Ethernet Setup Menu, page 7-4
• WLAN Setup Menu, page 7-7