Filter
Top Products
F-18
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Appendix F Cisco Unified IP Phone Non-Lockable Wall Mount
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones with Key Expansion Module
Figure F-17 Tab Location
To remove the phone and mounting plate from the wall bracket, you must disengage these tabs.
Before You Begin
You require two screwdrivers or metal rods.
Step 1 Push the screw drivers into the left and right holes in the phone mounting plate until you feel resistance.
Step 2 Press firmly inwards (towards the phone) to disengage the tabs, lift up on the phone to release the phone
from the wall bracket, and then pull the phone towards you.
345746