Filter
Top Products
8-3
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 8 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Anonymous Call Block Allows a user to reject calls from anonymous
callers.
For more information, go to the “SIP Profile
Configuration” chapter in the Cisco Unified
Communications Manager Administration
Guide.
Any Call Pickup Allows users to pick up a redirected call via the
CTI application, on any line in their call pickup
group, regardless of how the call was routed to the
phone.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Call Pickup” chapter.
Answer (oldest call) Allows a user to answer the oldest call that is
available on all line appearances on the user’s
phone, including Hold Reversion and Park
Reversion calls that are in an altering state.
No configuration required other than to make
this a programmable feature button.
Assisted Directed Call
Park
Lets the end user press only one button to
direct-park a call. This requires you to configure a
BLF Directed Call Park button. Then, when the
user presses an idle BLF Directed Call Park feature
button for an active call, the active call will be
immediately parked at the Dpark slot associated
with the Directed Call Park feature button.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, “Configuring Directed Call
Park” section.
Auto Answer Connects incoming calls automatically after a ring
or two.
Auto Answer works with either the speakerphone,
or the headset.
For more information, go to the “Directory
Number Configuration” chapter in the Cisco
Unified Communications Manager
Administration Guide.
Auto dial Allows the phone user to choose from matching
numbers in the Placed Calls log while dialing. To
place the call, the user can choose a number from
the Auto Dial list or continue to enter digits
manually.
Requires no configuration.
Table 8-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference