Filter
Top Products
8-12
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 8 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Do Not Disturb (DND) When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
You can configure the phone to have a
phone-button template with DND as one of the
selected features.
The following DND-related parameters are
configurable in Cisco Unified Communications
Manager Administration:
• Do Not Disturb—This check box allows you
to enable DND on a per-phone basis. Use
Cisco Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
• DND Incoming Call Alert—Choose the type
of alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
page and the Phone configuration page (Phone
Configuration window value takes
precedence).
• BLF Status Depicts DND—Enables DND
status to override busy/idle state.
For more information, go to the “Do Not
Disturb” chapter in the Cisco Unified
Communications Manager Features and
Services Guide.
External Call Control Allows Cisco Unified Communications Manager
to route audio and video calls to a route server that
hosts routing rules.
The route server receives routing requests from
Cisco Unified Communications Manager and in
turn returns routing directives to Cisco Unified
Communications Manager.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “External Call Control”
chapter.
Fast Dial Service Allows a user to enter a Fast Dial code to place a
call. Fast Dial codes can be assigned to phone
numbers or Personal Address Book entries. (See
“Services” in this table.)
For more information, refer to Modifying a
Phone Button Template for Personal Address
Book or Speed Dials, page 8-30.
Table 8-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference