Filter
Top Products
2-13
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address for a Cisco Unified IP Phone
For more information about using BAT, refer to the Cisco Unified Communications Manager Bulk
Administration Guide. For more information about creating of BAT Phone Templates, see the Cisco
Unified Communications Manager Bulk Administration Guide, Phone Template.
Related Topics
• Adding Phones with Auto-Registration, page 2-10
• Adding Phones with Auto-Registration and TAPS, page 2-11
• Adding Phones with Cisco Unified Communications Manager Administration, page 2-12
Determining the MAC Address for a Cisco Unified IP Phone
Several procedures described in this manual require you to determine the MAC address of a
Cisco Unified IP Phone. You can determine a phone’s MAC address in these ways:
• From the phone, press the Applications button and choose Phone Information and look at the
MAC
Address field.
• Look at the MAC label on the back of the phone.
• Display the web page for the phone and click the Device Information hyperlink.
For information about accessing the web page, see the “Accessing the Web Page for a Phone”
section on page 11-2.