Filter
Top Products
7-6
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 7 Configuring Settings on the Cisco Unified IP Phone
Ethernet Setup Menu
Related Topics
• Displaying a Setup Menu, page 7-2
• Unlocking and Locking Options, page 7-3
• WLAN Setup Menu, page 7-7
• IPv4 Setup Menu Options, page 7-10
SW Port Setup Speed and duplex of the Network port. Valid values:
• Auto Negotiate
• 1000 Full—1000-BaseT/full duplex
• 100 Half—100-BaseT/half duplex
• 100 Full—100-BaseT/full duplex
• 10 Half—10-BaseT/half duplex
• 10 Full—10-BaseT/full duplex
If the phone is connected to a switch, configure the port
on the switch to the same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option, you must change
the PC Port Configuration option to the same setting.
1. Unlock network configuration
options.
2. Scroll to the SW Port
Configuration option and then
press the Select softkey.
3. Scroll to the setting that you
want and then press the Select
key.
PC Port Setup Speed and duplex of the Computer (access) port. Valid
values:
• Auto Negotiate
• 1000 Full—1000-BaseT/full duplex
• 100 Half—100-BaseT/half duplex
• 100 Full—100-BaseT/full duplex
• 10 Half—10-BaseT/half duplex
• 10 Full—10-BaseT/full duplex
If the phone is connected to a switch, configure the port
on the switch to the same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option, you must change
the SW Port Configuration option to the same setting.
1. Unlock network configuration
options.
2. Scroll to the PC Port
Configuration option and then
press the Select softkey.
3. Scroll to the setting that you
want and then press the Select
key.
To configure the setting on multiple
phones simultaneously, enable the
Remote Port Configuration in the
Enterprise Phone Configuration
(System > Enterprise Phone
Configuration).
Note If the ports are configured for
Remote Port Configuration
in Unified CM, the data
cannot be changed on the
phone.
Ta bl e 7-1 Et he rne t Se t up Menu Options (continued)
Option Description To Change