Filter
Top Products
F-6
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Appendix F Cisco Unified IP Phone Non-Lockable Wall Mount
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones
c. Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The ports of the
phone should be accessible through the holes in the bracket.
d. Secure the phone bracket to the IP Phone with the machine screws, using the #1 Phillips-head screw
driver.
e. Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
clips incorporated into the phone body.
The following figure shows how the bracket attaches to the phone.
Figure F-5 Attach the Phone Bracket
Step 3 Attach the cables to the phone:
a. Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack.
b. (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable
to the 10/100/1000 Computer (PC access) port.
c. (Optional) If you are using an external power supply, plug the power cord into the phone and dress
the cord by clipping it into the clips that are incorporated into the phone body next to the PC port.
d. (Optional) If the cables terminate inside the wall bracket, connect the cables to the jacks.
The following figure shows the cables.
2
74937
Screw holes
Slot for
mounting tabs