Filter
Top Products
11-5
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 11 Monitoring the Cisco Unified IP Phone Remotely
Network Setup
Network Setup
The Network Setup area on a phone’s web page displays network setup information and information
about other phone settings. Table 11-2 describes these items.
You can view and set many of these items from the Network Setup menu on the Cisco Unified IP Phone.
For more information, see Chapter 7, “Configuring Settings on the Cisco Unified IP Phone.”
To display the Network Setup area, access the web page for the phone as described in the “Accessing
the Web Page for a Phone” section on page 11-2, and then click the Network Setup hyperlink.
Table 11-2 Network Setup Items
Item Description
DHCP Server IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone
obtains its IP address.
BOOTP Server Indicates whether the phone obtains its configuration from a Bootstrap Protocol (BootP) server.
MAC Address Media Access Control (MAC) address of the phone.
Host Name Host name that the DHCP server assigned to the phone.
Domain Name Name of the Domain Name System (DNS) domain in which the phone resides.
IP Address Internet Protocol (IP) address of the phone.
Subnet Mask Subnet mask used by the phone.
TFTP Server 1 Primary Trivial File Transfer Protocol (TFTP) server used by the phone.
TFTP Server 2 Backup Trivial File Transfer Protocol (TFTP) server used by the phone.
Default Router 1 Default router used by the phone.
DNS Server 1–3 Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS servers
(DNS Server 2–3) used by the phone.
Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in which
the phone is a member.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.