Filter
Top Products
ADMINISTRATION REQUIREMENTS
A-3
TRUNK GROUP Page 1 of 5
Group Number:
Group Name:
Direction:
Dial Access?
Queue Length:
Comm Type:
(number assigned)
MEGACOM 800
Group Type: tie
SMDR Reports? y
COR: 1
TAC: 189
1 -way in
y
0
voice
Outgoing Display? y
Busy Threshold: 60
Data Restriction? n
Night Service: ____
Internal Alert? n
Incoming Destination: ____
TRUNK PARAMETERS
Trunk Type(in/out):
Outgoing Dial Type:
wink/auto
_______
__________
Incoming Rotary Timeout(sec.): 5
Incoming Dial Type: tone
Disconnect Timing(msec): 500
Digits: _____
Digit Treatment:
Used for DCS?
ACA Assignment?
n
PBX ID: 1
n
Long Holding Time(hours): 1
Short Holding Threshold: 15
Short Holding Time(secs.): 10
Baud Rate: ______
Synchronization: ______
Duplex: _____
Incoming Dial Tone? _
Answer Supervision Timeout: ___
Maintenance Test? y
Suppress # Outpulsing? n
Figure A-3. Trunk Group Screen, Page 1 (MEGACOM 800)
At the 4ESS, and for MEGACOM 800 DNIS service applications, this trunk type is called PBX
(1-way incoming trunks). At the 4ESS, these PBX trunk types are translated for DTMFWK type
signaling. The Digits and Digits Treatment fields may or may not be translated depending
on the local numbering plan and other addressing requirements or restrictions for a 4ESS toll office.
Generally, the lncoming Destination field will be administered with either a 4- or 7-digit number, or
no number at all. Exact details depend on how the service is engineered from the toll office and
numbering plan limitations of the customer premises switch.