AT&T DS1/DMi/ISDN-PRI Telephone User Manual


 
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1
7-129
accommodated with a single trunk group, and that trunk group is provided with allocation and
scheduling controls, then significant trunking efficiencies are realized by distributing the traffic over
the total number of available trunks.
CBC Usage Allocation Plans control the trunk groups so that dedicating a trunk group to an ISDN
application is not needed. However, the administration ability to establish dedicated (or static) trunk
groups still exists. By implementing usage allocation plans, the customer can optimize the CBC trunk
group without involving any of the IXC/LEC network services personnel. The flexibility to control
the CBC trunk is built into Generic 1; changes are transparent to the network provider.
Network Facilities — ISDN-PRI Applications
This screen is, from the user perspective, display only. However, the Customer Support Service
Organization (CSSO) may administer (add) new services or features as required. In terms of
comparison, this screen is somewhat equivalent to procedure 279, word 1. Figure 7-69, Network-
Facilities Screen, depicts this procedure.
NETWORK-FACILITIES
Predefined Services/Features
Facility
Type
Coding
Facility
Type
CodingName
Name
outwats-bnd
operator
sub-operator
sdn
accunet
0
0
0
1
1
00001
00101
00110
00001
00110
mega800
megacom
inwats
wats-max-bnd
lds
1
1
1
1
1
00010
00011
00100
00101
00111
Additional Services/Features
Name
Facility
Type
Coding
Name
Facility
Type
Coding
_____________
_____________
_____________
_____________
_
_
_
_
______
______
______
______
_____________
_____________
_____________
_____________
_
_
_
_
_____
_____
_____
_____
Name
Facility
Type
Figure 7-69. Network-Facilities Screen
Up to 15 alphanumeric characters that uniquely identify (by name) the Service or
Feature.
The ISDN-PRI specification requires that each network capability be identified as
either a
feature
(0),
or
service
(1).