Filter
Top Products
7-122
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1
BCC
This field is only displayed when ISDN-PRI is enabled on the SYSTEM PARAMETERS
CUSTOMER-OPTIONS
screen and when the Communications Type field is administered
avd or data.
Trunk Type Establishes the physical type of incoming and outgoing trunks. For tie trunk
(in/out)
applications, field encodes and their descriptions are:
●
●
●
●
Auto
Immed-start
Wink-start
Delay-dial
With System 75, the digital loss plan is administered by entering a code with the
Group Name field. With Generic 1, the digital loss plan is administered with the
following three fields.
Connect to
The default is n. Enter y if the trunk group terminates on a Digital Toll Office.
Toll
STT Loss
This field is only displayed condition that the Connected to Toll field is translated n.
Allowable entries are the default normal or option low. Refer to chapter 4, The
Digital Loss Plan, for a description of the digital loss plan and for application
information.
DTT to
Allowable entries are the default normal or option low. Refer to chapter 4, The
DCO Loss Digital Loss Plan, for a description of the digital loss plan and for application
information.
Figures 7-64, Trunk Group Screen, Page 2 (Tie), an 7-65, Trunk Group Screen, Page 3 (Tie), depict
this procedure.