Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-75
Field 3 Assigns the extension partition identification for the tenant services feature. This
number associates the single or block of extension numbers to a particular ISDN
facility (NPA-NXX Designator).
Associates an NPA-NXX Designator with the previously defined extension.
Field 4
Procedure 210 Word 2: LDN, NPA, and NNX Attendant Partition Assignments
This procedure is used to configure the attendant consoles into functional groups known as attendant
partitions. Also, LDN and NPA-NXX assignments are completed, thus relating these assignments to
a particular attendant console or attendant partition. Figure 7-35, Procedure 210 Word 2: LDN,
NPA, and NNX Attendant Partition Assignments, depicts this procedure.
ENHANCED MODE - PROCEDURE: 210, WORD: 2
CONSOLE ASSIGNMENTS - ATTENDANT PARTITIONS
1.
2.
3.
4.
5.
Console Number:
Attendant Partition:
Control:
LDN:
NPA-NXX Designator:
Connected to CC0 ON-LINE
enter command:
Figure 7-35. Procedure 210 Word 2: LDN, NPA, and NNX Attendant Partition Assignments
Field 1
Translates a console number. Permitted encodes are any 2-digit number within the
range of 1 through 40.
NOTE: This console must be previously assigned in procedure 210, word 1.
Assigns the attendant partition number. Permitted encodes are any unused number
within the range of 0-40.
Field 2