Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-77
ENHANCED MODE - PROCEDURE: 014, WORD: 1
BEARER CAPABILITY CLASS OF SERVICE - CALL OPTIONS
1.
2.
3.
Bearer Capability COS:
Transport Mode:
Information Type:
DEFAULT CAPABILITIES
14.
15.
16.
Transport Mode:
Information Type:
Bearer Capability:
CALL TYPES AND ACTION TAKEN
4.
5.
6.
7.
8.
9.
Voice:
Voice Grade Data:
Mode 0:
Mode 1:
Mode 2:
Mode 3:
10.
11.
12.
13.
Unknown Digital:
Unknown Analog:
Mode 3/2:
X.25:
Connected to CC0 ON-LINE
enter command:
Field 1
Field 2
Field 3
Figure 7-36. Procedure 014 Word 1: BCCOS Routing Options
Translates new (additional) BCCOS numbers. Field encodes and their descriptions
are:
●
Dash (–) is used when the BCCOS does not support new numbers
● Numbers between (0 and 255)
Assigns the transport mode. Field encodes and their descriptions are:
0
Circuit switch the call
1
Packet switch the call
2
Both circuit and packet
Specifies whether the endpoint is unresticted (1) or restricted (0) with respect to
incoming calls.
It is the AAR/ARS software that routes calls. This software will block calls from an
unrestricted type to a restricted type. As a contrast, the software will route calls
from a restricted type to an unrestricted type. Furthermore, the software will route
calls from restricted to restricted, depending on other attributes of the two BCCOS
encodes.