Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-51
GENERIC 2
Depending on whether the switch provides private network ISDN service or public network ISDN
services, whether the switch functions as an endpoint or as a tandem node, will determine whether
other features should be administered before ISDN-PRI. Primarily, these other features include
tandem tie trunk access, trunk-to-trunk calling, and miscellaneous trunk restrictions. When
applicable, these features are administered with procedures 275, word 1, 110, 111, 102, and 010,
word 3.
Procedure 275 Word 4: ISDN Service — Enable/Disable
Screen-based procedure 275 is used to translate the system COS assignments as well as several other
miscellaneous services and features. Word 4 provides the capability for enabling and disabling the
ISDN service. Figure 7-25, Procedure 275 Word 4: System COS and Miscellaneous Service
Assignments (Generic 2), depicts this procedure.
ENHANCED MODE - PROCEDURE: 275, WORD: 4
SYSTEM COS - MISCELLANEOUS
1.
3.
Traditional Code Calling Access Digits:
Trunk-to-Trunk Transfer:
ATTENDANT RELEASE LOOP OPERATION
4.
5.
Status:
Timed Recall Timer:
14.
ISDN Status:
6.
Default Recent Disconnect Interval:
MAXIMUM PREEMPTION LEVEL
ADMINISTRABLE ALARMS
7.
All Incoming:
OUTGOING
15.
16.
17.
Even Port Peripherals:
Trunk Software:
Auxiliary Software:
8.
9.
Terminal:
Attendant:
DISPLAY ONLY
18.
Local Switch Number:
10.
11.
12.
13.
AUTOVON Interface Switch:
ACD Abandon Call Search:
MLL Status:
CMS Status:
Connected to CC0 ON-LINE
enter command:
Figure 7-25. Procedure 275 Word 4: System COS and Miscellaneous Service Assignments
(Generic 2)