Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
7-49
ENHANCED MODE - PROCEDURE: 107, WORD: 1
ATMS - TERMINATING TEST LINE ASSIGNMENT
1.
2.
Trunk Group:
Test Line Type:
TTL TELEPHONE DIGITS
3.
4.
5.
6.
7.
8.
9.
10.
Digit 1:
Digit 2:
Digit 3:
Digit 4:
Digit 5:
Digit 6:
Digit 7:
Digit 8:
11.
12.
13.
14.
15.
16.
17.
18.
Digit 9:
Digit 10:
Digit 11:
Digit 12:
Digit 13:
Digit 14:
Digit 15:
Digit 16:
DISPLAY ONLY
19.
Trunk Type:
Connected to CC0 ON-LINE
enter command:
Figure 7-23. Procedure 107 Word 1: ATMS Termination Test Line Assignment (System 85 R2V4)
Field 1
Field 2
Fields 3-18
Identifies those ISDN-PRI trunk groups accessed by the trunk verification features.
Permitted encodes are previously defined trunk group numbers from 18 to 999.
Dash (-), is appropriate for voice terminal and attendant console applications. If a
transmission test line is used, its type should be specified.
Assigns digits for the terminating test line. Procedure 107, words 2-7, need only be
translated whenever ATMS is used.
Procedure 108 Word 1: ISDN Trunk Group Terminating Test Line Number (Digits)
This procedure is used for ISDN-PRI testing purposes with procedure 648 test 3. This procedure
translates the line number that identifies the loop around termination for the particular B-channel.
This test line number must be assigned for both private and public network configurations. Whether
more than one terminating test line number is needed depends on the number of ISDN-PRI links and
whether they terminate on more than one switch. Figure 7-24, Procedure 108 Word 1: ISDN
Terminating Test Line Assignments (System 85 R2V4), depicts this procedure.