Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 75
7-111
SYNCHRONIZATION PLAN
Page 1 of 1
SYNCHRONIZATION SOURCE (DS1 circuit pack location)
Primary:
___
Secondary:
___
DS1 CIRCUIT PACKS
Location
Name
Slip
Location Name Slip
___
___
___
___
_______________
_______________
_______________
_______________
_
_
_
_
___
___
___
___
_______________
_______________
_______________
_______________
_
_
_
_
Figure 7-56. Synchronization Plan Screen
Primary The 3-character location of the circuit pack that is the primary synchronization
reference.
NOTE: The primary will be one of those DS1 circuit packs that has previously
been administered with slip detection y. The Location, Name, and Slip
(actually slip detection) fields list the DS1 circuit packs administered on the
DS1
CIRCUIT PACK
screen. The primary and secondary source must be selected from
this list.
Secondary
The 3-character location of the circuit pack that is the secondary synchronization
reference.
There is no requirement that a secondary source be provided. However, it is a good
practice.
The Command Line Feature set provides four executable commands for controlling
and monitoring synchronization. They are:
●
Disable
●
Enable
●
●
Status
Set