Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1
7-133
TRUNK FEATURES
Page 2 of 11
ACA Assignment?
Short Holding Time (secs.):
MIS Measured?
Used For DCS?
Maintenance Tests?
n
10
n
n
y
Long Holding Time (hours):
Short Holding Threshold:
Internal Alert?
PBX ID: 1
Data Restriction?
Send SID?
Send Name?
1
15
n
n
n
n
Service/
Feature
Called
Len
Called
Number
Del Insert
Per Call
SID/ANI
Night
Serv
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
___
___
___
___
___
___
___
___
___
___
___
___
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
_______________
___
___
___
___
___
___
___
___
___
___
___
___
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
__________
__________
__________
__________
__________
__________
__________
__________
__________
__________
__________
__________
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
Figure 7-71. Trunk Group Screen, Page 2 (ISDN-PRI)
Only the new ISDN-PRI service application fields or those fields that require special or additional
considerations are mentioned here.
Send SI
This field determines whether the Station Identification (SID) number is sent to the
network for both incoming and/or outgoing ISDN calls. For outgoing calls, the
user's calling party number is sent. For incoming calls, the number associated with
the answering party is sent. Field encodes and their descriptions are:
y
n
Send the SID.
NOTE: If SID is enabled, then the
SID PREFIX TABLE screen must be
completed.
Do not send the SID (default).
NOTE: Both SID and ANI significantly enhance the AT&T ISDN network
capabilities. The customer can subscribe to the SID/ANI service and have a
representation of the calling party number forwarded from the AT&T
network to the terminating switch. Therefore, consider provisioning and
enabling the SID/ANI option as part of the installation/administration
process.