Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-89
ENHANCED MODE - PROCEDURE: 101, WORD: 1
TRUNK GROUP CHARACTERISTICS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Trunk Group:
Balance:
Battery Reversal:
Incoming Prefix Digit:
DCS:
Touch-Tone In:
Touch-Tone Out:
CDR Active:
AIOD Billing Number:
TIMED RECALL
10.
11.
Time:
Level:
12.
13.
14.
15.
16.
CDR Variable Timer:
Pad Group:
Tie Toll:
APLT Features Allowed:
Disconnect Supervision:
Connected to CC0 ON-LINE
enter command:
Figure 7-42. Procedure 101 Word 1: ISDN Trunk Group, CDR, and Digital Loss Plan (Generic 2)
Field 1 Displays the trunk group number, such as previously translated in procedure 100.
Field 4
Field 2 Assigns whether the trunk group has (1) or does not have (0) balanced transmission
facilities. Encode 1 is required for ISDN-PRI.
Field 3 Assigns whether the trunk group has (1) or does not have (0) the battery reversal
option. Encode 0 is required for ISDN-PRI.
Assigns the number of prefix digits. Field encodes and their descriptions are:
● Dash (–) is always applicable for ISDN-PRI applications except for DID trunks
(trunk types 30 and 31).
● Any single digit number (0 through 9). Which number is determined by the
trunk group and its application.
Assigns whether the trunk group is (1) or is not (0) used for DCS applications.
This field is ignored for ISDN applications and either encode (0 or 1) may be
translated.
Field 5
Fields 6-7