Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-95
Field 1 Assigns either an extension number, vector directory number, or trunk group. Field
encodes and their descriptions are:
●
●
Field 2
0
1
Field 3
Field 4
–
0
1
Field 5
0
1
Field 6
000 through 99999, for extension and directory numbers. Whether the number
is three, four, or five digits depends on the numbering plan.
18 through 999, for trunk group numbers.
Specifies whether the encode for field 1 is a trunk group or extension/vector
directory number. Field encodes and their descriptions are:
Trunk groups
Extension numbers and vector directory numbers
This field is only applicable for the identified extension’s display module. It controls
the number of blank spaces that are inserted before the first displayed character of
the name, dialed number, or trunk group name. Permitted encodes are numbers
from 1 to 30.
The main function of this field is to provide some administration control over what
is displayed on the voice terminals digital display. Field encodes and their
descriptions are:
(Dash) all incoming only trunk groups
The user (extension) does not want the outgoing trunk group name displayed but
does desire the dialed number to remain on the display
The user desires to display the name of the outgoing trunk group (for example,
ISDN/SDN, MEGACOM, CBC)
NOTE: For a tandem interworking call the name of the incoming trunk
group is transmitted in the display IE of the ISDN-PRI outgoing trunk
group.
Assigns the method used to define the name. Field encodes and their descriptions
are:
Add a new name or change an existing name; requires that the name change be
made with word 2
Copy the name from the extension or trunk group displayed in field 6
This field is used with field 5 to copy an existing name to the extension or trunk
group identified in field 1. Field encodes and their descriptions are:
●
●
000 through 99999, for extension and directory numbers. Whether the number
is three, four, or five digits depends on the numbering plan.
18 through 999, for trunk group numbers.
Procedure 012 Word 2: Name Database
This word is used to translate a name (up to a maximum of 30 characters). Figure 7-46, Procedure
012 Word 2: Name Database, depicts this procedure.