Filter
Top Products
7-40
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
Field 4
The main function of this field is to provide some administration control over what
is displayed on the voice terminals digital display. Field encodes and their
descriptions are:
–
0
1
(Dash) for all incoming only trunk groups.
Used when the user (extension) does not want the outgoing trunk group name
displayed but does desire the dialed number to remain on the display.
Used when the user desires to display the name of the outgoing trunk group
(such as ISDN/SDN, MEGACOM, or CBC).
Field 5
0
1
Field 6
NOTE: For a tandem interworking call, the name of the incoming trunk
group is transmitted in the display IE of the ISDN-PRI outgoing trunk
group.
The method that defines the name. Field encodes and their descriptions are:
Used for adding a new name or changing an existing name; requires that the
name change be made with word 2.
Used for copying the name from the extension or trunk group that is displayed in
field 6
This field is used with field 5 to copy an existing name to the extension or trunk
group identified in field 1. Field encodes and their descriptions are:
●
●
000 through 99999, for extension and directory numbers
NOTE: Whether the number is three, four, or five digits depends on the
numbering plan.
18 through 999, for trunk group numbers
Procedure 012 Word 2: Name Database
This word is used to translate a name (up to a maximum of 30 characters). Figure 7-17, Procedure
012 Word 2: Name Database Entry (System 85 R2V4), depicts this procedure.