Filter
Top Products
7-34
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
ENHANCED MODE - PROCEDURE: 103, WORD: 1
NETWORK TRUNK GROUP TRANSLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
Trunk Group:
Facility Restriction Level:
Network Trunk:
Main/Tandem:
Incoming Tie to AAR/ARS or APLT:
Authorization Code Required:
Bridge-On Allowed:
Trunk Reservation Limit:
AAR/ARS Prefix:
10.
11.
12.
13.
14.
15.
Data Protection (Permanent):
Remote Access Echo Suppressor:
AAR Conditional Routing:
Second TCM:
Digit Collection:
Bearer Capability:
Connected to CC0 ON-LINE
enter command:
Figure 7-14. Procedure 103 Word 1: Network Trunk Group Translations (System 85 R2V4)
Field 1
Displays the trunk group number previously administered in procedures 100 and
101.
Fields 2-13 DS1 or ISDN-PRI do not place any new or additional considerations on translating
these fields. The encodes that are translated are generally dependent on each trunk
group, its application, and the associated trunk groups. Refer to Appendix C,
Administrative Procedure Summary, for more information about the dynamic 120
trunk types. For more information see Dynamic Trunk Type in Procedure 100 Word
1.
Field 14 Specifies how the dialed digits are outpulsed. Field encodes and their descriptions
are:
0
1
When digit outpulsing may overlap digit reception
When all digits must be received before outpulsing may start. All ISDN
applications, regardless of the trunk type, require that a (1) be translated in this
field. Digit outpulsing does not begin until all digits are received. Then digits
are outpulsed as ASCII characters — per the ISDN recommendations.