Filter
Top Products
7-130
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 1
Facility
The ISDN-PRI specification further requires that each service or feature be
Coding
identified as a:
●
●
●
●
Parameterized Service
Parameterized Feature
Binary Service
Binary Feature
The facility coding values, listed on the
NETWORK-FACILITIES screen, provide this
identification.
Trunk Group — ISDN-PRI Trunk Applications
ISDN-PRI trunk groups are defined by using the first page of the
TRUNK GROUP screen. Since ISDN-
PRI uses Message Oriented Signaling, the format of this screen is somewhat different from the
assigned basic DS1 service.
Page 2 administers certain features that are unique to ISDN-PRI trunk groups. Screen pages 3 and 4
are only displayed if the Service Type field on page 1 is administered CBC. Screen pages 5 through
11 are used as required to assign group members.
Figure 7-70, Trunk Group Screen, Page 1 (ISDN-PRI), depicts this procedure.
TRUNK GROUP
Page 1 of 11
Group Number:
__
Group Type: isdn-pri SMDR Reports? y
Group Name:
Direction:
Dial Access:
Queue Length:
Service Type:
Usage Alloc?
OUTSIDE
two-way
y
0
cbc
y
CALL
COR:
Outgoing Display?
Busy Threshold:
Auth Code?
Far End Test No:
1
n
99
n
TAC:
___
Night Service:
____
_________________
TRUNK PARAMETERS
Send Display/TCM in codeset 6/7:
Max Message Size to Send:
6
260
Connected to Toll?
Bit Rate:
n
1200
STT Loss:
normal
DTT to DCO Loss:
normal
Synchronization: async Duplex: full
Figure 7-70. Trunk Group Screen, Page 1 (ISDN-PRI)