Filter
Top Products
7-36
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
ENHANCED MODE - PROCEDURE: 116, WORD: 1
DS1 AND ISDN TRUNK ASSIGNMENTS
EQUIPMENT LOCATION
1.
2.
3.
4.
5.
Module:
Cabinet:
Carrier:
Slot:
Circuit:
6.
7.
8.
9.
Trunk Group:
Night Terminal:
Disable Signaling:
AIOD Equipment Number:
10.
Interface Endpoint:
Connected to CC0 ON-LINE
enter command:
Figure 7-15. Procedure 116 Word 1: DS1 Trunk Assignments to Equipment/Circuit Location
(System 85 R2V4)
The DS1 channels are assigned to slot and circuit locations according to the order in which the
module processor scans the equipment carrier. The first circuit scanned is circuit 0 of slot 05 (or 18);
the second is circuit 0 of slot 06 (or 19); the third is circuit 0 of slot 7 (or 20); and the fourth is
circuit 1 of slot 05 (or 18). Continue in this way to channel 12 that will be located at circuit 3 of slot
07 (or 20); remaining 12 channels are assigned beginning with circuit 0 of slot 0 (or 13). Continue in
this way through channels 23 or 24, depending on whether robbed-bit or 24th-channel signaling is
translated; refer to table 7-3, DS1/ISDN-PRI Administration — Channel Versus Trunk Assignments.