Filter
Top Products
7-48
ADMINISTRATION OPTIONS AND REQUIREMENTS — SYSTEM 85
Field 1 Specifies the AAR pattern number. Permitted encodes are 1 through 640.
Field 2 Specifies the AAR preference number. Permitted encodes are sequential numbers
within the range of 1 through 16.
Field 3
Translates the ISDN trunk type. Recall that for ISDN applications the trunk type
may be translated as fixed (that is, one specific type) or dynamic (which may
include those from the fixed category). Generally, the trunk type selected will
depend on the network service or feature value, which is translated in field 4. Table
7-3, Network Service/Feature Options, shows the relationships.
Field 4 Specifies the network service requested. Refer to Table 7-3, Network
Service/Feature Options, for the appropriate encode.
Fields 5-9
Enables one or more BC codes for the AAR plan — pattern number — preference
number.
Table 7-5, Administration Summary, summarizes administration of NSF in word 5,
field 4, and IXC in word 1, field 10:
TABLE 7-5. Administration Summary
Procedure 321
Word 5 Word 1
Field 4 Field 10
IE
(NSF)
(IXC) Results
208
208
NSF
dash
208 TNS
208
dash
NSF
dash
dash
nothing
Field 5
Field 6
Field 7
Field 8
Field 9
Enables (1) or disables (0) support for the voice or voice-grade data BC code.
Enables (1) or disables (0) support for the data mode 1 BC code.
Enables (1) or disables (0) support for the data mode 2 BC code.
Enables (1) or disables (0) support for the data mode 3 BC code.
Enables (1) or disables (0) support for the data mode 0 BC code.
Procedure 107 Word 1: ISDN Trunk Verification by Terminal, Attendant, and ATMS
This procedure must be translated to support trunk verification by voice terminal and trunk
verification by attendant over ISDN-PRI facilities. Figure 7-23, Procedure 107 Word 1: ATMS
Terminating Test Line Assignment (System 85 R2V4), depicts this procedure.