AT&T DS1/DMi/ISDN-PRI Telephone User Manual


 
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-91
ENHANCED MODE - PROCEDURE: 103, WORD: 1
NETWORK TRUNK GROUP TRANSLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
Trunk Group:
Facility Restriction Level:
Network Trunk:
Main/Tandem:
Incoming Tie to AAR/ARS or APLT:
Authorization Code Required:
Bridge-On Allowed:
Trunk Reservation Limit:
AAR/ARS Prefix:
10.
11.
12.
13.
14.
Data Protection (Permanent):
Remote Access Echo Suppressor:
AAR Conditional Routing:
Second TCM:
Digit Collection:
Connected to CC0 ON-LINE
enter command:
Figure 7-43. Procedure 103 Word 1: Network Trunk Group Translations (Generic 2)
Field 1
Fields 2-13
Displays the trunk group number, such as previously administered in procedure 100
and 101.
The ISDN-PRI does not place any new or additional considerations on translating
these fields. The encodes that are translated are generally dependent on each trunk
group, its application, and the associated trunk groups.
Specifies how the dialed digits are outpulsed. Field encodes and their descriptions
are:
Field 14
0
1
Digit outpulsing may overlap digit reception.
All digits must be received before outpulsing may start All ISDN applications,
regardless of the trunk type, require that a (1) be translated in this field. Digit
outpulsing does not begin until all digits are received. Then digits are outpulsed
as ASCII characters — per the ISDN recommendations.