Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-101
Field 12
Specifies the number (designation) of the interexchange carrier (IXC)/ISDN
Network Identifier for this trunk group. Permitted field entries may be any number
within the range of 0 through 999.
NOTE: The IXC/ISDN network identifier enables the switch to provide equal
access capability.
When the trunk group is routed over private network ISDN-PRI transmission
facilities, then no IXC/ISDN network is used and the zero (0) option must be
translated.
Each network provider (of ISDN service) will have a different IXC identifier
number. When connecting to AT&T ISDN network facilities, the required number
is 288.
Procedure 309 Word 5: ARS–ISDN BCCOS
This procedure is required for translating ISDN trunk groups into the ARS plan. Figure 7-50,
Procedure 309 Word 5: ARS–ISDN BCCOS, depicts this procedure.
ENHANCED MODE - PROCEDURE: 309, WORD: 5
ARS - ISDN AND BEARER CAPABILITY COS
1.
2.
3.
4.
5.
6.
ARS Plan:
Pattern Number:
Preference Number:
ISDN Dynamic Trunk Type:
ISDN Network Service Value:
Bearer Capability COS:
Connected to CC0 ON-LINE
enter command:
Figure 7-50. Procedure 309 Word 5: ARS-ISDN BCCOS (Generic 2)