Filter
Top Products
ADMINISTRATION OPTIONS AND REQUIREMENTS — GENERIC 2
7-71
Procedure 280 Word 1: ISDN-PRI Receive/Transmit Codeset Mapping
This procedure is used to translate Codeset Mapping parameters. Figure 7-32, Procedure 280
Word 1: ISDN-PRI Receive/Transmit Codeset Mapping (Generic 2), depicts this procedure.
ENHANCED MODE - PROCEDURE: 280, WORD: 1
ISDN CODESET MAPPING
1.
2.
Codeset Map Number:
Incoming/Outgoing:
MAPPED FROM CODESET/INFORMATION ELEMENT
3.
4.
Codeset:
IE Opcode:
MAPPED TO CODESET/INFORMATION ELEMENT
5.
6.
Codeset:
IE Opcode:
DISPLAY ONLY
7.
Available Map Number Mappings:
Connected to CC0 ON-LINE
enter command:
Figure 7-32. Procedure 280 Word 1: ISDN-PRI Receive/Transmit Codeset Mapping (Generic 2)
Field 2
Field 1
Assigns a codset map number (such as defined in procedure 262, word 3). Field
encodes and their descriptions are:
●
Dash (–), which disables codeset mapping.
● Any number between 0 and 15 that is previously defined with procedure 262,
word 3.
Specifies whether codeset mapping is for incoming messages or outgoing messages.
Field encodes and their descriptions are:
0
Assigns mapping for incoming messages.
1
Assigns mapping for outgoing messages.
From a Generic 2 perspective, incoming means mapped from Codeset 6 to
Codeset 7. While outgoing means Codeset 6 is mapped to Codeset 7. Two-way
trunk groups will normally have a Codeset Map translated for both incoming and
outgoing.