Lucent Technologies 555-230-024 IP Phone User Manual


 
System Capacity Limits
555-230-024
B-20 Issue 5 January 1998
46. Only 1 processor interface (PI) circuit pack is supported in Release 6vs and Release 6si configurations,
therefore a total of 4 physical links (used for BX.25 or PRI) are available. PRI interface via the PI is not
available in France, Germany, and Italy. PRI interface via the packet controller is used.
47. Other countries must use the PI when they have the Release 6vs configuration without packet bus
capability.
48. The TN2185 BRI trunk circuit pack provides 8 ports. Each port (2B+D) provides 2 BRI trunks.
49. The following items detract from the total number of available “stations:”
Analog music-on-hold
Attendants
Modem pool conversion resources
TAAS port
Stations (digital, display, BRI, and so forth.)
Analog announcements
Analog external alarm port
Agent login IDs
ACD agents
50. All BRI stations can be display stations. Release 6vs can have up to 50 BRI stations if the unit is configured
for packet interface.
51. The software limit for digital stations in Release 6vs is 400. Due to power limitations, 120 is the
recommended limit.
52. Including extensions administered without associated hardware (Release 6si and Release 6r). The station
capacity for Release 6vs is a software limit because of the physical capacity (10 port slots).
53. The station button capacity can support all stations equipped as 8410D digital sets with display. For
example, a total of (292 x 2400) = 700.8K units. The table below shows approximate unit values for various
station types. The term “default” means with no non-default buttons administered. The term “loaded”
means all possible buttons - including the indicated number of call/bridged appearances (CA) -
administered.
8403B (default): 32
8403B (loaded with 3 CA): 152
8410B (default): 32
54. The following button features share a common resource in memory:
Call Forwarding, Call Forward Busy Don’t Answer, Send Extension Calls (SAC w/extension), Station Busy
Indicators, Trunk Group Status, Hunt Group Status, PCOL GRoup Status, Data Module, Terminating
Extension Group Status, Attendant Group Status/DXS, Remote Trunk Group Select.
55. For G3r, TN789 Radio COntroller Circuit Packs cannot be used in DS1 remoted EPNs.