Lucent Technologies 555-230-024 IP Phone User Manual


 
Features
555-230-024
A-30 Issue 5 January 1998
Transfer
Allows telephone users to transfer trunk or internal calls to other telephones
within the system without attendant assistance. This feature provides a conve-
nient way to connect a party with someone better qualified to handle the call. Sin-
gle-line telephone users momentarily flash the switchhook or press the Recall
button, dial the desired extension, and hang up. Multiappearance telephone
users press the Transfer button, dial the desired extension number, and press the
Transfer button again.
Transfer — Outgoing Trunk
to Outgoing Trunk
Allows a user or attendant to initiate two or more outgoing trunk calls and then
transfer the trunks together. The transfer operation removes the original user from
the connection and conferences the outgoing trunks. Alternatively, the controlling
party can establish a conference call with the outgoing trunks and then drop out
of the conference, leaving only the outgoing trunks on the conference. This is an
optional enhancement to Trunk-to-Trunk Transfer and requires careful administra-
tion and use. DCS Trunk Turnaround may be a safer alternative to this feature.
Trunk Flash
Trunk Flash allows a feature or function button on a multifunction telephone or
attendant console to be assigned as a Flash button. Pressing this button while
connected to a trunk (which must have been administered to allow trunk flash)
causes the system to send a flash signal out over the connected trunk.
Trunk Flash enables multifunction voice terminals to access central office
customized services that are provided by the Central Office to which DEFINITY
ECS is connected. These services are electronic features, such as conference
and transfer, that are accessed by a sequence of flash signal and dial signals
from the DEFINITY System station on an active trunk call. The Trunk Flash feature
can help to reduce the number of trunk lines connected to the DEFINITY system.
“Digit 1 as Flash” as used in Italy and the United Kingdom will not serve as the
flash button in this application.
Trunk Group Busy/Warning Indicators to
Attendant
Provides the attendant with a visual indication that the number of busy trunks in a
group has reached an administered level. A visual indication is also provided
when all trunks in a group are busy. This feature is particularly helpful to show the
attendant that the Attendant Control of Trunk Group Access feature needs to be
invoked.