Lucent Technologies 555-230-024 IP Phone User Manual


 
Networking Solutions
555-230-024
12-10 Issue 5 January 1998
Digital Interfaces
Lucent Technologies supports both T1 and E1 facilities. As industry standards
around the world, T1 and E1 facilities provide the latest alternative to analog
trunking.
E1 Interface
DEFINITY ECS also supports E1 connections. T1/E1 access and conversion
allows simultaneous connection to both T1 (1.544 Mbps) and E1 (2.048 Mbps)
facilities (using separate circuit packs).
T1 Interfaces
When planning your networking requirements, one of the options you should con-
sider is multiplexing over Digital Services 1 (DS1) facilities. As the industry stan-
dard for interconnecting digital systems, DS1 is an economic alternative to
analog trunking arrangements. Multiplexing up to 24 digitized voice/data com-
munications paths onto a single T1 carrier or other high-speed digital facility
(such as fibre or microwave) can reduce your network trunking and equipment
costs.
Used to connect switches to the public network or to other switches in a private
network, DS1 also delivers high-speed, end-to-end digital connectivity. Voice and
data calls are completed at transmission speeds of up to 64 kbps.
DEFINITY ECS offers several options in supporting the DS1 interface. The
options include support for voice-grade DS1, alternate voice/data, and Digital
Multiplexed Interface. The voice-grade DS1 interface is a T1 D4 chan-
nel-bank-compatible interface that does the following:
Uses in-band bit-robbed signaling to provide 24 voice-grade-only tie
trunks consisting of 56-kbps channels for voice and voice-grade data
transmission
Interconnects DEFINITY ECS with other switches with an external D4
channel bank or with other switches (analog or digital) having the
appropriate interfaces
Interconnects DEFINITY ECS with central offices such as Lucent
Technologies 4ESS switch (where services such as MEGACOM and
Software Defined Network can be accessed) and 5ESS switches
Interconnects DEFINITY ECS with private networks by connection with
DS1 facilities
Can be used with the same Automatic Alternate Routing capabilities as
normal analog E & M lead tie trunks