Filter
Top Products
Features
555-230-024
A-10 Issue 5 January 1998
Authorization Codes
Authorization Codes extend calling-privilege control and enhance security for
remote-access callers.
Authorization codes may be used to:
■ Override facility restriction levels assigned to originating stations or trunks
■ Restrict individual incoming tie trunks and remote-access trunks from
accessing outgoing trunks
■ Track CDR calls for cost-allocation purposes
■ Provide additional security control
Auto Start and Don’t Split
Auto Start allows the attendant to make a telephone call without pushing the start
button first. If the attendant is on an active call and presses digits on the keypad,
the system automatically splits the call and begins dialing the second call. The
Don’t Split feature deactivates the Auto Start feature and allows the sending of
touch tones over the line for the purposes of such things as picking up mes-
sages.
Automatic Callback
Allows internal users who placed a call to a busy or unanswered internal tele-
phone to be called back automatically when the called voice terminal becomes
available.
When a user activates Automatic Callback, the system monitors the called
telephone. When the called telephone becomes available to receive a call, the
system originates the Automatic Callback call. The originating party receives
priority ringing. The calling party then lifts the handset and the called party
receives the same ringing provided on the original call.
Automatic Circuit Assurance
Assists in identifying possible trunk problems. The system maintains a record of
the performance of individual trunks and automatically calls a designated user
when a possible failure is detected. This feature provides better service through
early detection of faulty trunks and consequently reduces out-of-service time.
Automatic Incoming Call Display
Displays information about an incoming call while you are using a display tele-
phone.