Filter
Top Products
AA Extensions (#607)
Description
This System Programming procedure lets you identify extensions where
PARTNER Attendants are connected to the system. Doing so lets the system
notify users with display phones when they are receiving a call that has been
transferred from the PARTNER Attendant. (This procedure applies only to
PARTNER Attendants—do not use it with the Automated Attendant Service of a
voice messaging system.)
Related Features
■
■
■
■
For each PARTNER Attendant extension, use Transfer Return Extension
(#306) to identify the extension to which a call should be routed if the
destination extension does not answer.
Set Automatic Extension Privacy (#304) to Not Assigned for the PARTNER
Attendant extension if you want to be able to intercept calls routed to the
device.
Considerations
Chapter 4 provides information on using PARTNER Attendants with the
system.
On system display phones, “AA” displays when a call is being transferred
from a PARTNER Attendant. “Transfer from AA” displays when a call
transferred by a PARTNER Attendant was not answered and is being
returned to your extension.
Valid Entries
1 = Assigned
2 = Not Assigned
✔
Programming
To identify an extension where a PARTNER Attendant is installed:
1.
Press [
Feature ] [ 0 ] [ 0 ] [ Systern Program ] [ System Prograrn ] [ # ] [ 6 ] [ 0 ] [ 7 ].
2. Enter the extension number to which the PARTNER Attendant is connected.
For example, to select extension 27, press [
2
] [
7
].
3.
To assign or unassign the extension, press [
Next Data ] until the appropriate
value displays.
4. To assign or unassign a second PARTNER Attendant extension, press
[
Next Item ] or [ Prev Item ] until the extension number shows on the display.
Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-2
AA Extensions (#607)